Sponsored by Avery Dennison.
Diectric Compelable Solution
Ev Battery Path Path Path Path voltages is increasing, which leads to the prevalence of the power of the power and the operation of advanced vehicles. With this broke down, however, a large need for difelectric solutions only and lasting, but fills the formation of modern packs and the requirements of manufacturing processes.
The Avery Dennison Volt Fast ™ is Dielectric PSA paper batteries in the EV batteries discussing requirements. The SUBT-Ground Source ™ Stretled contribution provides manufacturers with a solid, harmonious, preventing tearing, and accepting hot temperatures within the package.
To prevent the update of the electricity to the EV battery packets is important
Evolution of the Ev Battery Pack voltage evolution and energy difficulties is good for improving the performance of a car and width.
Today's EVS uses battery packets working at 400v or 800 + v. This enables immediate charging times and the power of energy efficiency in the car. Similarly, the energy development of energy – the amount of energy stored in each of the unit of abundance or volume – allowing simple, soft battery packets can save more energy.
Prevention of electricity has been most concerned for safety of battery battery. Through this contract in the function of the pack, however, to prevent preventing is important to protect short circuits; a hot run; or driver's electrical risks, passengers and professionalists.
Viewing of Traditional Search Solution
Footback solutions, DielectCic system are needed that is required, and Evicacies of EV battery manufacturers have used different methods. The most common of the dielectric flowers (are used by spraying or diminishing), or oppression – pressure (PSA) Thope using the dielectric films such as pet or polymide.
These covers and tapes can be included in the internal component of the battery pack to prevent unintentional electricity. They ensure that the battery packets can be effective in various contexts, improving their performance and long-term life, and improving the driver and passenger safety.
The Dielectric Coatings has enjoyed additional profits with film tapes due to their ability to use easily in stone parts with complex geometries. When manufacturers continue to turn their designs, consistency has been the most important requirement of Dielectric Building.
Solution of the most native dielectric solutions
The dielectric Coatings is indeed a successful electricity of the electric batteries in the EV batteries, and they are very interesting because of their findings. However, these covenants have flaws that can affect the production process and efficiency of battery pack design.
The ideal dielectric solutions are required that allows manufacturers to avoid this shortcomings. PSA tapes have a dielectric FIT films, designed to focus and are built with their subordinations, is not such a solution.
Dielectric Tips Disconnect against dielectric technology
The new version of the PSA Technology Technology has been available on the shortcomings. This tape includes the Dielectric File Facestock associated completely with the regimen processing.
The tape can be included in an empty metal (reference process or default process), and stamped and empty. The result is part of the structured metal of the dielectric protection. Unlike clothing, the PSA and its Filmed film tape relays injuries or crack.
In the test completed in Avery Dondery Pepes Tape Laborator, ISO-9000 samples, the solution samples of the Dielectric Protection Dielectric protection is included in aluminum metal diseases. Samples are already tried to protect the tape stiffness under various typical industrial press Metamph. In all cases, the Septsa Solution solution for allowing the pressures worked, even in undefined conditions when it is added enough pressure to crack aluminum supstrate.
Here is how this new technology is compared to traditional dielectric solutions.
There are many challenges associated with dielectric flowers, including:
- Agree of a limited meeting line
- Increasing waste and cost
- Lack of complex components / make-up
- A limited space in battery pocket due to dielectric size
- Large bodies of body
- Easily torn or fragmented
With thanksgiving, the Dielectric PSA temple supplies the other above, using the following solutions:
- The smallest processing process and a quick meeting line
- Lowly lower rates and high production levels
- Tight tables include high lining in a maximum of tears
- The Dielectric Psatectric PSate PSate The tape provides great digCccic power for each unit of magnitude compared to the general combination of dielectric
- The body's initiative initiative is less low than required to apply
- The highest fullness of leave is united with high tears.
Introducing Volt Great Great Great | Dielectric solution made of stamped stamped from Avery Dennison
Avery Dennison has developed and presented a remedy for Dielectric protection based on PSA. Part of the Computer Ground Grough ™, the Tepi is the next generation of the Volt Gorof Ground ™ Strough ™ StreakPress PPA Dielectric Pipe (Avery Dievison Pipe Pipe (Avery Denelectric Pipe.
This solution is designed to accommodate various needs while discussing the important challenges of electricity installation in battery packets. Important, this new number for the tip matches the iron and other metal strategies.
Set simply, Supply-General Voct Great Great ™ can be installed in empty metal, and stamped into a very complex device without tape, tearing or feeding any other type of damage.
Like PSA tents, the next volt-volt Great Great ™ is easy to use and re-install, including a minimum profile, and lasts longer in battery life.
Dogs
Next-Gwiner Volt Grough ™ Singret Stretch can be used to bind and protection from different applications throughout the battery package. It is widely used with cool plates and packet buildings.
- Pack elements of the building
- Flexible and Firm Based and Cell Cert Communication Systems in Ar Blart Assemblies
- A variety of parts of healing, including ship plates and cool ribbons
Avery Dennison Solutions of the EV for produced battery
Avery Dennison Development EV battery includes various copies of viewing and protection of taps designed for many PSA technology. These are advanced to make the EV batteries safe, work well and easy to integrate.
The portfolio can help manufacturers solve some common challenges in battery and construction, including reducing the power of the dielectric and structure / design.
Without a relationship
Avery Dennison tapes donated broad support over its product portfolio. This includes the maintenance and maintenance users with access to access and interfection with specialists to improve the different resolution solutions for Ev.
To learn the complete lesson above, including the proposed use charges and results, click here to download a white paper.
Contact Avery Dennison to learn more
If you are an OE, Tier TEFFERTER supplier or a Representative Representative is looking better in the PPPa tooan power on the EV batteries, please contact us directly to Dustin.Winter.vanraphorst@ansdendenne.com.
To learn more about Avery Dennison Performance Capes, Visit: www.tapes.azyenendenison.com/evbattery.